Skip to main content

PRECISION BEARING MAINTENANCE

Definition: Ensuring that all maintenance practices for components associated with the bearing are at a level to allow the maximum performance of the bearing. These include installation practices, tools used, skills of millwrights, the accuracy of mating components, alignment, and balancing of the rotating assembly.

BY DOUGLAS MARTIN.

Let's start with a discussion about the effects of a lack of precision maintenance. There was a case of an oil refinery that was having a recurrent failure of a fan. The mean time between repair (as the vibe crew would pick out a defect) was six months. Looking back, I remember how proud the vibe team was and how an outer ring of a bearing on display, marked in paint pen $10,000 in savings, to demonstrate their successful diagnostics.

When attending the installation, the first question the millwright asked was why was the tapered adapter sleeve so loose on the shaft prior to driving the bearing up the sleeve? Indeed, it easily slid onto the shaft instead of the usual resistance of a typical adapter assembly.

Looking at the adapter sleeve and noted what was the correct part number used, in reasonable condition. The part was made in France. This was unusual as I’d never seen a sleeve of this brand made there. It made me wonder if it was counterfeit, turned out, the parts were made in France; however, production ceased by the end of the 1970s.


When discussing this with the planner, the job plan simply said “change bearing” but there was no reference to components, including the adapter assembly. Back to the installation, this loose sleeve was replaced by a new sleeve and the fan was assembled and was no longer a bad actor.

WHAT WERE THE LESSONS?

1. Good well-trained mechanics know of the issues, but there is no feed[1]back loop due to process or culture. Invoking precision maintenance would encourage a culture allowing open communication.

2. The job plan was inadequate as it failed to include the least expensive component of the assembly in the BOM. The deficit was written into the job plan for more than 20 years without any apparent review. Whether the omission was due to a lack of knowledge about the assembly, or a cost savings was unknown.

PRECISION MAINTENANCE PROCUREMENT RECENTLY.

I was in a paper mill rebuild shop and was shown a part that arrived from a distributor. It was asked why the bearing part number on the distributor label was different from the bearing part number on the manufacturer label. That label had the manufacturers’ part number and the mill’s store code. There was one letter missing at the end of the part number and that single number would indicate that a critical component was not included. The millwrights were concerned that they had the correct part.

Digging further, the distributor’s ordering system called out the complete manufacturers’ part number and the associated store’s code for the paper mill. As it turns out, the data field for the label printer had a limit to the number of characters and that last letter was left off the part number.

In this case, all was good. The information was there to match to the job plan, the stores code matched the job plan and the manufacturers’ part number also matched the job plan. It was simple misunderstanding to the correct source for the number. What should be included on the job plan (and the distributors system) should be acceptable substitutes in terms of manufacturers and alternate part numbers (for instance bearings with more precise run out than needed for the application).

CONDITION MONITORING

Currently, I am working with a user with a clutch assembly that had a recent catastrophic failure, leading to the vessel it was installed on being out of commission for a month. Prior to the failure, vibration monitoring was being done. Variances were noted; however, there was nothing causing an alarm or predicting the catastrophic failure.

In this case, the vibration readings were being taken during the time the clutch was engaged and, in this case, there is no relative motion between the inner and outer rings. In terms of bearing monitoring, there would be little worthwhile data to collect, as without relative ring motion, no damage frequencies would be apparent.

Unfortunately, this is not an unusual situation due to the widespread use of vibration analysis and it is thought of as the panacea of condition monitoring. Also, with external service providers, the cost per point monitored is reduced when there are more points to monitor meaning assets where vibration analysis is not the best method, get monitored by vibration analysis.

With precision maintenance and failure mode effects analysis (FMEA) should be done to determine the most critical failure modes and what the most effective method is to detect it. In the case of the clutch, a visual inspection once per month with a borescope was initiated. The vibration readings were restricted to only the mode where there is relative motion of the bearing (when it would generate damage frequency).

Elevate standards of precision where needed, capture the data that is already there.

At my sessions, I discuss the measurement of bearing seats and how three diametres should be taken in three planes (nine measurements total). Then discussing the allowable out of round and taper is half the diameter tolerance. This is to maintenance personnel whose job card only asks for the diameter (one single value). The irony is that will take multiple diameters and simply record the average when the data is there to at least tell that the shaft or housing is out of round (at least).

They do rebut saying that this has been the practice for 20 years and the machine runs fine. This may be true, but the extra time to document is nothing, as the machinist is already there and has set his instruments up. However, there is a difference between documentation and allowances of deviations. Nothing is wrong with the documentation of diametres, out of round and taper, even if the specification for OOR and taper have been decided to be the same as the diameter. The data is there if something does start going wrong. In addition, it develops a habit/instills the culture of precision maintenance, so when there is an issue, the practices are in place. The bearing manufacturers publish a range of tolerances for shaft and housing fits as a function of bearing loading. This directly demonstrates the understanding that the diameter tolerances are flexible based on application conditions. There is no reason why a facility cannot do the same for their machinery, based on experience and criticality to the operation.

Douglas Martin is a heavy-duty machinery engineer based in Vancouver. He specializes in the design of rotating equipment, failure analysis, and lubrication.

 

Source: Machinery & Equipment MRO, June 2022

Comments

Popular posts from this blog

Maintenance 4.0 Implementation Handbook (pdf)

WHAT IS MAINTENANCE 4.0? Industry 4.0 is a name given to the current trend of automation and data exchange in industrial technologies. It includes the Industrial Internet of things (IIoT), wireless sensors, cloud computing, artificial intelligence (AI) and machine learning. Industry 4.0 is commonly referred to as the fourth industrial revolution. Maintenance 4.0 is a machine-assisted digital version of all the things we have been doing for the past forty years as humans to ensure our assets deliver value for our organization. Maintenance 4.0 includes a holistic view of sources of data, ways to connect, ways to collect, ways to analyze and recommended actions to take in order to ensure asset function (reliability) and value (asset management) are digitally assisted. For example, traditional Maintenance 1.0 includes sending highly-trained specialists to collect machinery vibration analysis readings on pumps, motors and gearboxes. Maintenance 4.0 includes a wireless vibration sensor conne

27 steps of the Gearbox Repair and rebuilding

 27 steps of the Gearbox Repair and rebuilding: Step 1 Cleaning exterior of Gearbox and identification. Step 2 Remove all bolts from the gearbox. Step 3 Disassembly for Gearbox preliminary evaluation of the condition and repair required Step 4 Mag inspect Gearbox. Step 5 check all Gears. Step 6 Customer communication of health of the Gearbox. Step 7 Parts to be repaired or, reverse engineered parts where needed required for Gearbox rebuild. Step 8 Failure analysis during complete disassembly and evaluation of the component wear and damage. Step 9 Cleaning all internal components and housing. Step 10 Check all bearings diameters in house. Step 11 Check all shafts Step 12 inspect all Gears. Step 13 Set up check line bore of the gearbox. Step 14 Repair and rebuild Gears back to O.E.M Step 15 Replacing all bearings seals and gaskets Step 16 Repair and rebuild all shafts again to O.E.M Step 17 Realigning all gears shafts and bearings back to O.E.M Step

Thermal growth: how to identify, quantify and deal with its effects on turbomachinery

Thermal growth, as used in the field of machinery alignment, is machine frame expansion resulting from heat generation. The generation of heat, of course, is caused by operational processes and forces. Materials subjected to temperature changes from heat generation will expand by precise amounts defined by their material properties. In turbomachinery, thermal growth results from the temperature differences occurring between the at-rest and running conditions. Generally speaking, the greater the temperature difference, the greater the thermal growth. The magnitude of the growth can be calculated from three variables: ∆ T (temperature difference) C   (coefficient of thermal expansion) L    (distance between shaft centerline and machine supports) When machinery begins to generate heat, the temperature difference between at-rest and running conditions will cause thermal expansion of the machine frame, thereby bringing about the movement of the shaft centerlines. This can produce changes in

John Crane's Type 28 Dry Gas Seals: How Does It Work?

How Does It Work? Highest Pressure Non-Contacting, Dry-Running Gas Seal Type 28 compressor dry-running gas seals have been the industry standard since the early 1980s for gas-handling turbomachinery. Supported by John Crane's patented design features, these seals are non-contacting in operation. During dynamic operation, the mating ring/seat and primary ring/face maintain a sealing gap of approximately 0.0002 in./5 microns, thereby eliminating wear. These seals eliminate seal oil contamination and reduce maintenance costs and downtime. John Crane's highly engineered Type 28 series gas seals incorporate patented spiral-groove technology, which provides the most efficient method for lifting and maintaining separation of seal faces during dynamic operation. Grooves on one side of the seal face direct gas inward toward a non-grooved portion of the face. The gas flowing across the face generates a pressure that maintains a minute gap between the faces, optimizing flui

Technical questions with answers on gas turbines

By NTS. What is a gas turbine? A gas turbine is an engine that converts the energy from a flow of gas into mechanical energy. How does a gas turbine work? Gas turbines work on the Brayton cycle, which involves compressing air, mixing it with fuel, and igniting the mixture to create a high-temperature, high-pressure gas. This gas expands through a turbine, which generates mechanical energy that can be used to power a variety of machines and equipment. What are the different types of gas turbines? There are three main types of gas turbines: aeroderivative , industrial, and heavy-duty. Aeroderivative gas turbines are used in aviation and small-scale power generation. Industrial gas turbines are used in power generation and other industrial applications. Heavy-duty gas turbines are typically used in large power plants. What are the main components of a gas turbine? The main components of a gas turbine include the compressor, combustion chamb